Power-Pole Move ZR Trolling Motor
✓#1 Authorized Power Pole Dealer
✓ Lowest Price Guaranteed
✓ Free & Fast Shipping
✓ Questions? Call a Power Pole Expert: 1-844-987-5777
✓#1 Authorized Power Pole Dealer
✓ Lowest Price Guaranteed
✓ Free & Fast Shipping
✓ Questions? Call a Power Pole Expert: 1-844-987-5777
Time to step up your game with the Power-Pole MOVE ZR - the ultimate brushless trolling motor for elite anglers. With nearly a decade of research and development behind it, the MOVE ZR delivers unparalleled power, durability, and efficiency, all while operating with near-silent operation. And when you’re out on the water, you need to know that you can rely on the brand that has your back - Power-Pole. Take control of your fishing destiny and MOVE your boat like never before.
They say there’s no point in reinventing the wheel. We disagree. We took everything you rely on in trolling motors and re-imagined it exclusively using the “best of the best” when it comes to technology, innovation and materials. No options were left off the table. All with the mission to make a peak-performing trolling motor that outlasts everything else on the water.
Built To Brave Any Waterway Without Backup
Relentlessly tested using materials like an Aerospace Grade Titanium Shaft, engineered with Compound Fail-Safes, and protected with Multi-layered Corrosion Resistants. MOVE was made to be nearly unstoppable.
Whisper Silent Operation
Fish like an assassin, and let nature be your cover. MOVE’s Stealth Steering Drive and next-gen brushless tech allow you to blend into waterways with whisper-silent operation measured to be more silent than nature itself.
Next-Gen Brushless Motor
MOVE’s brushless motor was built using our Power Unity System. Meaning every component was custom-engineered to optimize all levels of performance. This gives MOVE incredible thrust, unparalleled efficiency and a whisper-silent operation.
State-Of-The-Art Trolling Tech
You’ll dominate any depth you deem worthy with a tool kit of finely tuned GPS navigation modes integrated with leading industry fish-finder partners and a built-in transducer option.
Wireless Control
Get the total trolling experience exactly how you’d like with our expertly crafted, user-friendly wireless controls. All MOVE controllers work with every MOVE model, so you can customize your control anywhere on deck.
Rugged, Reliable & Relentlessly Tested
Built using uncompromising materials and engineered with built in fail-safes, all protected with multi-layered corrosion resistants. MOVE was made to keep you moving. No matter what.
Aerospace Grade Titanium Shaft
Our trolling shaft is constructed using unbreakable aerospace-grade titanium, one of the planet’s strongest, most corrosion-resistant yet lightweight metals. Which is why we included a lifetime warranty.
Flexible Battery Setups
MOVE pushes 30% more thrust than any leading industry trolling motor. Giving your boat the agility to get to the next fishing spot first while holding it down better than anyone else in your wake.Our trolling shaft is constructed using unbreakable aerospace-grade titanium, one of the planet’s strongest, most corrosion-resistant yet lightweight metals. Which is why we included a lifetime warranty.
Compound Fail-Safes
Meticulously designed with backup systems on top of backup systems, on top of even more backup systems, MOVE is made to redefine the true meaning of a reliable trolling motor.
Multi-Layered Corrosion Resistants
Rated for both salt and freshwater use, our exclusive powder coating process gives you the high-end look you like while remaining resistant to the toughest conditions nature can throw at you.
Next-Gen Brushless Motor
Our custom-built brushless motor was built using the Power Unity System, which is designed to optimize every aspect of performance and deliver more power at significantly lower RPMs. This gives MOVE incredible thrust, unparalleled efficiency and a whisper-silent operation.
Dyneema Super Cord
Our pull cord is made with Dyneema fibers, making it multiple times stronger than steel wire ropes. So you’ll never have any problem stowing and deploying, no matter how hard you pull.
Extreme Efficiency
MOVE allows all-day anglers to go farther with 30% more power efficiency, getting marathon levels of trolling time out of their batteries without sacrificing performance.
Low-Profile Design
MOVE was made to make you look, with a thoughtfully sleek, low profile and modern design. MOVE won’t obstruct your vision or take away from top-end speeds while still looking seriously slick.
Easy Lift-Assist Deployment
We designed our scissor lift deployment model with a 3-to-1 pulley system and a cylinder assist to make deployment and stowing easy and simple with minimal effort.
Ultra Lightweight
With our ultra-lightweight design, MOVE gives boat bows a break with up to 35% less weight letting them keep top-end speed and protect fuel economy.
The MOVE ZR is a bow-mount trolling motor rated for both salt and fresh water, aimed at bass, multispecies and inshore boats. It deploys and stows on a scissor mount with a nitrogen-filled lift-assist shock and a Dyneema pull cord. The ZR works particularly well on bows carrying multiple fish finders, or where the trolling motor is mounted farther forward, because the scissor action clears crowded deck space better than a pivot. It mounts at the bow only. Before ordering, confirm you have a flat, reinforced mounting surface and enough clear deck ahead of the bow hardware.
Measure from the top of your bow mounting surface straight down to the waterline at your normal fishing load, then choose the shaft that keeps the propulsion motor at least 12 inches below the surface — that is the depth it needs for proper performance. Add length beyond that minimum to allow for bow rise, wave action and the load changes of a normal day: a shaft sitting too shallow ventilates and loses bite in a chop, while excess shaft adds stowed height. The ZR is offered here in 45-, 52- and 60-inch shafts, and higher bows, rougher water and heavier bow loads all point toward the longer options.
The MOVE ZR produces up to 78 pounds of thrust at 24 volts and up to 100 pounds of thrust at 36 volts. Those are maximum true thrust figures at each voltage, so the battery bank you wire determines which one applies — a 24-volt setup will not reach the 36-volt number. Thrust measures static pushing force, not boat speed: hull weight, windage, current and how the boat is loaded decide how quickly you actually move and how long a charge lasts. Heavier boats and consistently windy water are the usual reasons anglers wire for 36 volts.
The MOVE ZR operates on either a 24-volt or a 36-volt battery system and adjusts to whichever it is connected to automatically. A 24-volt installation can use two matched 12-volt batteries wired in series or a suitable single 24-volt lithium battery; a 36-volt installation can use three matched 12-volt batteries in series or a suitable single 36-volt lithium battery. Multiple same-voltage batteries may also be wired in parallel when installed to the guide, and deep-cycle marine batteries give the best results. The positive lead must run through a 50-amp circuit breaker on a 24-volt setup, or a 60-amp circuit breaker on a 36-volt setup. Batteries, charger, wiring and breaker are not included — follow the current installation and owner's guide for connections and cable sizing.
The configuration option decides whether the motor arrives with an integrated transducer. A ZR ordered as None has no transducer built into the lower unit; you keep whatever transducer your fish finder already uses. The Lowrance configuration adds Power-Pole's integrated Lowrance HDI transducer option, built into the lower unit rather than clamped or glued to the hull, so it aims where the motor aims and stays clear on the trailer. It is intended for compatible Lowrance displays — check the connector and display compatibility for your exact unit before ordering, since not every Lowrance display or adapter is supported.
The MOVE ZR package includes the wireless RealFeel foot pedal, a wireless information display, a wireless hybrid remote with a mountable charging cradle, and three wireless foot buttons — Active Heading, Anchor Mode and Reverse Mode. Every MOVE controller works across MOVE models, so you can place controls where they suit your deck rather than where a cable reaches. Batteries, wiring, a circuit breaker and a quick-release mounting plate are not part of the package. If a particular controller matters to your setup, confirm it against the configuration you select on this page.
No. The quick-release mount is not included with the MOVE ZR — that differs from the MOVE PV, which ships with one. If you want to lift the motor off the deck for trailering, winter storage or theft deterrence, budget for the quick-release plate as a separate accessory and confirm fitment for the ZR's scissor mount before ordering. Without it, the motor bolts directly to the bow mounting surface. That is a normal permanent installation and nothing is lost functionally; the motor simply is not removable without tools.
GPS and a heading sensor are built in, so the motor holds position and steers without a separate GPS puck. The advanced navigation modes are Anchor Mode, which maneuvers the boat onto a GPS position and holds it; Compass Heading, which runs a selected heading; Vector Mode, which keeps the boat on a straight-line track; and Follow-A-Route, which runs a saved route through the Power-Pole app with ProNav or a compatible multifunction display. One year of ProNav support is included. Route following relies on your phone, tablet or MFD, so plan a mount and power for that device.
Rinse the shaft, lower unit, mount and propeller with fresh water after every saltwater trip and let the assembly dry before you cover it. The titanium shaft and multi-layered corrosion-resistant finish are built for salt exposure, but rinsing is what keeps salt out of the scissor mount's moving parts and off the electrical connections. Keep battery connections tight and free of corrosion — clean dirty terminals with a water and baking-soda solution — and inspect the wiring and moving components regularly. Check the propeller for wrapped line and the mount for play at the start of each season, and store the motor out of the elements over the winter to preserve the finishes. Further reading: maintenance guide.
The MOVE ZR carries a lifetime warranty on the shaft and a three-year warranty on all other components, covering defects in materials and workmanship under the warranty terms. Coverage is activated by registration, so register the motor online or through the Power-Pole app when you take delivery, and keep the dated sales receipt as proof of purchase. Complete terms, conditions and exclusions are set out in the current installation and owner's guide, which is worth reading before installation rather than after a problem. If you are not sure whether an issue is a warranty matter, call 844-987-5777, email sales@ecofishingshop.com or use our live chat and we will help you work it out.
Still have questions? Message our Chat, call us at 844-987-5777 or email sales@ecofishingshop.com. Shipping, delivery and other questions can be answered on our FAQs page.