Skip to content

YakAttack TowNStow Wheelie Bar Kayak Cart

Sold out
Original price $350.00 - Original price $350.00
Original price
$350.00
$350.00 - $350.00
Current price $350.00

✓#1 Authorized YakAttack Dealer
✓ Lowest Price Guaranteed
✓ Free & Fast Shipping Guarantee: In Stock and Ready to Ship
✓ Questions? Call a YakAttack Expert: 1-844-987-5777

YakAttack TowNStow Wheelie Bar Kayak Cart

The YakAttack TowNStow Wheelie Bar Kayak Cart is a track-mounted kayak cart that rests the kayak's weight on a reinforced axle and rubber bunk pads beneath the hull, not on the hull or the track system. Track-mounted connectors act as pivot points for arms that rotate around and under the hull, which reduces stress on the track and the hull.

Four adjustment collars, two on the axle and two on the outer arms, let you set each arm independently without tools. The outer arms adjust from 22.5 in (57.2 cm) to 36 in (91.4 cm), and the axle sets to wheel-to-wheel widths from 37.75 in (95.9 cm) to 48 in (121.9 cm). The cart rolls on TowNStow 3-Piece BeadLoc wheels with rubber tread, airless tires designed for hard-packed surfaces.

Track-mounted Quick Connect housings stay on the kayak, and the arms detach so the cart can go back to your vehicle. Installation needs GearTrac or another factory-installed accessory track around the tankwell or rear compartment, with at least 4 in (10.2 cm) of track space on each side.



TowNStow Wheelie Bar Specifications

Cart Type:
Track-mounted kayak cart with adjustable arms and axle
Mounting:
Track-mounted Quick Connect housings with ball-and-socket pivoting connections and an orange latch
Housing Hardware:
Two MightyBolts and two 1 in (2.5 cm) knobs per side
Track Requirement:
GearTrac or another factory-installed accessory track around the tankwell or rear compartment, at least 4 in (10.2 cm) of track space on each side
Outer Arm Positions:
10 positions, from 22.5 in (57.2 cm) to 36 in (91.4 cm)
Axle Positions:
Six positions, 37.75 in (95.9 cm) to 48 in (121.9 cm) wheel to wheel, measured center to center of the wheels
Axle Between Outer Arm Connections:
36 in (91.4 cm) at maximum adjustment
Bunk Pads:
Rubber, sliding along the axle from nearly touching at center to 17.5 in (44.5 cm) outside to outside
Upright Rotation:
360 degrees to match the hull angle
Adjustment:
Tool-free, with an orange adjustment trigger on each collar
Wheels:
TowNStow 3-Piece BeadLoc wheels with rubber tread, airless, snap on and off with a release button
Materials:
UV-resistant polymer, hard-coat anodized aluminum and marine-grade hardware
Origin:
Made in the USA


Wheelie Bar Kayak Cart Features

  • Weight Carried by the Axle: The kayak rests on a reinforced axle and rubber bunk pads beneath the hull, not on the hull or the track system.
  • Pivoting Track Connection: Ball-and-socket connections on the track-mounted housings let the arms rotate around and under the hull, and an orange latch locks the cart in place.
  • Tool-Free Adjustment: Four adjustment collars set the axle and each outer arm independently, with a snap-button stop on each bar to prevent accidental full removal.
  • Pivoting Bunk Pads: The bunk pads slide along the axle and each upright rotates 360 degrees, so the pads can follow the angle of your hull.
  • BeadLoc Wheels: TowNStow 3-Piece BeadLoc wheels use airless tires with rubber tread for hard-packed surfaces and come off with a push of the wheel release button.
  • On-the-Water Storage: The axle can rest directly behind the seat, or on the stern with shorter outer arms, depending on how the cart is mounted.
  • Housings Stay on the Kayak: The Quick Connect housings can remain on the kayak when the arms are detached and the cart returns to the vehicle.
  • Materials and Construction: UV-resistant polymer, hard-coat anodized aluminum and marine-grade hardware, made in the USA.


Frequently Asked Questions About the YakAttack TowNStow Wheelie Bar

Which kayaks fit the YakAttack TowNStow Wheelie Bar?

The YakAttack TowNStow Wheelie Bar mounts to the kayak's track, so the kayak needs GearTrac or another factory-installed accessory track around the tankwell or rear compartment, with at least 4 in (10.2 cm) of track space on each side. A list of compatible kayak models is not published. If your kayak has no track there, YakAttack GearTrac can be added before the housings are installed.

How is the YakAttack TowNStow Wheelie Bar different from the TowNStow Bunkster?

The YakAttack TowNStow Wheelie Bar mounts to your kayak's rear track and carries the hull on a reinforced axle and rubber bunk pads, with arms that pivot around and under the hull. The TowNStow Bunkster uses fixed uprights in a bunk-style setup, and no track requirement is listed for it. Your choice comes down to whether your kayak has track at the stern.

How much weight can the YakAttack TowNStow Wheelie Bar carry?

No load capacity and no cart weight are published for the YakAttack TowNStow Wheelie Bar, so we cannot give you a rating. The kayak itself counts toward the load, along with anything left inside it, such as the seat, crate, tackle, battery and other gear. Contact us with your total loaded weight before you order, and do not estimate from another cart's rating.

What comes with the YakAttack TowNStow Wheelie Bar?

The YakAttack TowNStow Wheelie Bar includes TowNStow 3-Piece BeadLoc wheels with rubber tread. The track-mounted Quick Connect housings, with their MightyBolts and 1 in (2.5 cm) knobs, are described as part of the system, and an additional pair for a second kayak is a separate two-pack. No itemized box list is published, so contact us to confirm contents. Cam straps are listed as a separate product.

How adjustable is the YakAttack TowNStow Wheelie Bar?

The YakAttack TowNStow Wheelie Bar has four adjustment collars, two on the axle and two on the outer arms, and each arm adjusts independently without tools. The outer arms have 10 positions from 22.5 in (57.2 cm) to 36 in (91.4 cm), and the axle has six positions from 37.75 in (95.9 cm) to 48 in (121.9 cm) wheel to wheel. The bunk pads slide along the axle, and each upright rotates 360 degrees.

What wheels does the YakAttack TowNStow Wheelie Bar use, and where can I roll it?

The YakAttack TowNStow Wheelie Bar uses TowNStow 3-Piece BeadLoc wheels with rubber tread. The tires are airless, designed for hard-packed surfaces, and the wheels snap on and off with a release button. Wheel diameter and a sand tire option are not published for this cart, so compare other carts in our transport carts collection if you launch from soft sand.

Can the YakAttack TowNStow Wheelie Bar ride on the kayak on the water?

The YakAttack TowNStow Wheelie Bar can be stored on the kayak, with the axle resting directly behind the seat, or on the stern with shorter outer arms, depending on how it is mounted. Clearance with a crate or other rear gear is not published, and stability depends on your kayak and load, so test the fit in shallow, calm water close to shore before you rely on it.

What strapping and towing guidance applies to the YakAttack TowNStow Wheelie Bar?

Strap type, tie-down points, maximum towing speed and care instructions are not published for the YakAttack TowNStow Wheelie Bar, and no straps are listed as included. A cam strap two-pack is listed as a separate product. Contact us before you buy if you plan to tow over long distances or rough ground, and keep the loaded cart at a slow walking pace until you know how it handles.

What warranty covers the YakAttack TowNStow Wheelie Bar?

The YakAttack TowNStow Wheelie Bar is backed by the YakAttack Built for Life Guarantee. The guarantee's term, coverage and exclusions are not published on the product page, so we do not state them here. Contact us if you need help with a warranty question or claim, and we will work through it with you.

Still have questions? Message our Chat, call us at 844-987-5777 or email sales@ecofishingshop.com. Shipping, delivery and other questions can be answered on our FAQs page.



Your Satisfaction with YakAttack is Guaranteed:

  • Backed by the YakAttack Built for Life Guarantee.
  • Made in the USA.